Still ECH 15 страница 93 Скачать руководство пользователя

Страница: 93 / 104

Troubleshooting common problems

During the use and maintenance of lithium-ion

power batteries, one or more of the following

abnormal conditions may occur with the bat-

tery or battery system. Please arrange for a

professional technician to perform the neces-

sary repairs according to the instructions in

this manual. If you have any questions about

identifying or dealing with abnormal condi-

tions, please promptly contact the after-sales

service department to obtain professional

technical support.
1. If the battery is found to have abnormal me-

chanical characteristics such as swelling, or

rupture, melting, deformation or distortion of

the casing before installation and use, immedi-

ately stop using the battery and store it sepa-

rately;
2. If the battery terminal compression bolts,

conductive tape, main circuit wires or connec-

tors show abnormal signs such as looseness,

cracks, splits in the insulation layer or burn

marks, immediately stop using the battery, find

and analyse the cause and fix it;
3. If the polarity of the positive and negative

terminals of the battery is found not to match

the polarity marks before installation, immedi-

ately stop using the battery and contact the af-

ter-sales service department to replace the

battery or discuss alternative solutions;
4. If the battery temperature is found to be

over high before installation and during use,

stop using the battery immediately and leave it

on its own. If the temperature continues to

rise, it needs to be covered in sand;
5. If the battery is found to emit smoke before

installation and during use, immediately stop

using the battery, cover it in sand, and notify

the company's after-sales service department

to obtain technical support;

Maintenance

Routine maintenance

1. The battery must be attended during charg-

ing, especially when it is nearly full. During the

charging process, make sure that the plug and

socket are in good contact, the charging de-

vice is working properly and the battery mod-

ule contacts are in good condition. Should any

abnormality be detected, the issue must be

fixed before charging;
2. Before charging and discharging, check the

battery voltage, temperature and pressure dif-

ference on the round indicator unit and make

sure that all the values are within the normal

range;
3. In case of excess dust, metal filings and

other debris on the battery system cover and

terminal posts, clean as soon as possible with

compressed air or a dry cloth. Do not use wa-

ter or other objects moistened with water to

clean;
4. During charging and discharging, protect

the battery system cover and terminal posts

from coming into contact with water or other

conductive objects. For example, avoid opera-

tion in heavy rain;
5. Estimate the charging time and discharging

time of the battery according to the actual

state of using of the battery or battery module.

Observe the battery or battery module for any

abnormal status at the end of the charging

process and discharging process, for example

unusual battery voltage difference.

Regular maintenance

1. Check the conductive strips, voltage acquis-

ition terminals and other connectors for loos-

ing, peeling, rusting or deformation. Make sure

that the serial and parallel harness for the bat-

tery module is secure and reliable (once per

month);
2. Check the battery cover for cracks, defor-

mation, loose terminal posts, expansion and

other abnormal states (once per month);

Lithium-ion battery use and maintenance

Troubleshooting common problems

5001 801 1555 EN - 12/2020

Содержание ECH 15









































































































Результаты поиска

Содержание ECH 15

Отзывы:

Похожие инструкции для ECH 15

Бренды по названию

Популярные бренды

Still ECH 15, Оригинальное руководство пользователя

Результаты поиска

Содержание ECH 15

Отзывы:

Похожие инструкции для ECH 15

Бренды по названию

Популярные бренды