Still ECH 15 страница 38 Скачать руководство пользователя

Страница: 38 / 104

Safety tests

Carrying out regular inspections on

the truck

The operating company must ensure that the

truck is checked by a specialist at least once a

year or after particular incidents.
As part of this inspection, the technical condi-

tion of the truck must be completely tested

with regard to accident safety. In addition, the

truck must be thoroughly checked for damage

that may have been caused by improper use.

A test log must be created. The results of the

inspection must be retained at least until a fur-

ther two inspections have been carried out.
The inspection date is indicated by an adhe-

sive label on the truck.

–

Arrange for the authorised service centre to

perform regular testing on the truck.

–

Observe the guidelines for tests carried out

on the truck in accordance with FEM 4.004.

The operating company is responsible for en-

suring that any defects are remedied without

delay.

–

Notify your authorised service centre.

NOTE

In addition, observe the national regulations

for the country of use.



Safety

Safety tests

5001 801 1555 EN - 12/2020

Содержание ECH 15









































































































Результаты поиска

Содержание ECH 15

Отзывы:

Похожие инструкции для ECH 15

Бренды по названию

Популярные бренды

Still ECH 15, Оригинальное руководство пользователя

Результаты поиска

Содержание ECH 15

Отзывы:

Похожие инструкции для ECH 15

Бренды по названию

Популярные бренды