Still CX-T-40 Скачать руководство пользователя страница 87

Страница: 87 / 146

Operation

Handling trailers

1047_003-024

1047_003-025

Towing a trailer

NOTE

Ensure that you understand how to operate

any braking systems that may be ﬁtted to

trailers being towed. Ensure trailer load

is secure, stable, evenly distributed on the

trailer, and within the rated drawbar pull of the

tractor. Inspect trailer steering to determine

the type ﬁtted. This is particularly important

on long trains because of the cutting in effect

when cornering.

CAUTION

NEVER travel on public highways unless you

comply with local highway regulations.

NOTE

If travelling on public highways ensure that

regulation plates conform to local highway

regulations.

– Release trailer braking system and remove

any chocks from the trailer wheels.

– Check width of the widest trailer or load to

ensure free passage en-route.

– Check that the direction of travel is clear,

slowly move the tractor forward taking up

the slack in the trailer couplings before

gently accelerating to the required speed.

– When approaching you destination reduce

speed in advance to ensure bringing the

tractor and trailers to rest. A sudden halt

could cause load displacement and trailers

could "jackknife".

NOTE

A trailer train cannot be backed up into posi-

tion, so learn to position trailers ﬁrst time.

DANGER

Never carry passengers on a trailer unless it has

been speciﬁcally designed for such purpose.

51048070007 [EN]

Содержание CX-T-40



















































































































































Результаты поиска

Содержание CX-T-40

Отзывы:

Похожие инструкции для CX-T-40

Бренды по названию

Популярные бренды

Still CX-T-40, Оригинальное руководство пользователя

Результаты поиска

Содержание CX-T-40

Отзывы:

Похожие инструкции для CX-T-40

Бренды по названию

Популярные бренды