Still CX-T-40 Скачать руководство пользователя страница 35

Страница: 35 / 146

Safety

Safety tests

– Name and address of the company imple-

menting the modiﬁcation

Medical equipment

When a driver is wearing medical equipment,

e.g. heart pacemaker or hearing aids, the

operation of this equipment may be affected.

A doctor or the manufacturer of the medical

equipment should be asked whether the

equipment is sufﬁciently protected against

electromagnetic interference.

Safety tests

Regelmäßige Prüfung

(FEM 4.004)

nach nationalen Vorschriften
basierend auf den EG-Richtlinien:
95/63/EG, 99/92/EG, 2001/45/EG

Die Prüfplakette ersetzt nicht das Prüfprotokoll

Nächste Prüfung

56344391019

Mitglied der:
Fédération
Européene
de la Manutention

STILL GmbH Hamburg

0000_003-001_V3

Regular safety inspection of the truck

Periodic safety inspections and safety

inspections after unusual incidents

The operating company must ensure that the

truck is inspected by a qualiﬁed person at least

once a year or after unusual incidents.
As part of this inspection, the complete

technical condition of the truck must be tested

with regard to accident safety. The truck must

also be thoroughly inspected for damage

which could have been caused by possible

improper use. A test log must be created. The

results of the inspection must be retained at

least until a further two inspections have been

carried out.
The inspection date is indicated by an adhe-

sive label on the truck.
– Have the service centre perform regular

safety inspections on the truck.

– Observe the FEM 4.004 guidelines for

inspections carried out on the truck.

The operating company is responsible for

ensuring any defects are remedied without

delay.
– Contact your service centre.

51048070007 [EN]

Содержание CX-T-40



















































































































































Результаты поиска

Содержание CX-T-40

Отзывы:

Похожие инструкции для CX-T-40

Бренды по названию

Популярные бренды

Still CX-T-40, Оригинальное руководство пользователя

Результаты поиска

Содержание CX-T-40

Отзывы:

Похожие инструкции для CX-T-40

Бренды по названию

Популярные бренды