Still CX-T-40 Скачать руководство пользователя страница 127

Страница: 127 / 146

Maintenance

Maintenance every 500 hours

Service the braking system

1044_490-004

Check clearance

– Release the brake.
– Measure the air gap (1) with an adjustment

shim at three different points separated by

120°.

Min. clearance: 0.3 mm
Max. clearance: 0.8 mm

WARNING

– If the air gap cannot be satisfactorily adjusted,

change the brake disc.

Checking the braking power

Braking must be carried out unladen in accor-

dance with standard ISO/DIS 6292. According

to this standard, industrial tractors with 1 or 2

braked wheels travelling at 12 km/h must have

a braking distance of less than 3.62 m.

WARNING

Keep the braking path clear and ensure there is

sufﬁcient safety distance.

– Drive the truck at 12 km/h.
– Apply the brake and measure the stopping

distance.

– If the distance measured is greater than

3.62 m, the brake must be changed by our

service department.

WARNING

Never operate the truck with a defective brake.

51048070007 [EN]

119

Содержание CX-T-40



















































































































































Результаты поиска

Содержание CX-T-40

Отзывы:

Still CX-T-40, Оригинальное руководство пользователя, Страница: 127 / 146

Результаты поиска

Содержание CX-T-40

Отзывы: