ASTOPAD
®
Instructions for Use
15
5 Symbols
Symbols and indications on the control panel
The Standby button switches between the
Standby mode
and the
On mode
.
The device is in
Standby mode
if the blue LED illuminates.
“Start” button: Starts the heating process.
Temperature increase set value.
Temperature decrease set value.
“Stop” button.
Alarm condition when the yellow LED flashes.
No applied part is connected to the control unit.
The applied part heats up to the set temperature.
The applied part cools down to the set temperature.
Battery capacity indicator.
Defective or incorrect battery.
Battery being charged or the device is connected to the mains.
Содержание ASTOPAD
Страница 59: ...ASTOPAD Instructions for Use 59...
