ASTOPAD
®
Instructions for Use
11 Information messages and troubleshooting
50
11 Information messages and troubleshooting
11.1 Battery status
(only for devices with a battery)
Control panel
Information
condition
The battery is defect or no original battery is inserted.
Device response
After the Start screen in mains operation and in
Standby
mode
, the display (11, 8) shows the crossed-out battery
symbol.
►Required
action(s)
►Insert new original battery.
The battery should be replaced every 3 years to ensure
adequate battery capacity.
11.2 Applied part temperature too low
Control panel
Information
condition
The actual temperature (1) is lower than 20°C.
Device response
Display (1) shows
L
.
Possible reasons
►Required
action(s)
The actual temperature is outside the display range
►Heat applied part.
