Stihl TS 350 Скачать руководство пользователя страница 5

The use of any cut-off 
machine may be 
hazardous. Because a
cut-off machine is a 
high-speed, fast-cutting

power tool, special safety precautions
must be observed to reduce the risk of
personal injury and fire. 

It is important that you read, fully under-
stand and observe the following safety
precautions and warnings. 

Read the Owner’s 
Manual and the safety 
instructions periodically. 

Careless or improper use of any 
cut-off machine may cause serious or 
fatal injury.
Have your STIHL dealer show you 
how to operate your cut-off machine. 
Observe all applicable local safety 
regulations, standards and ordinances.

:DUQLQJ

Minors should never be allowed to use a
cut-off machine. Bystanders, especially
children and animals should not be 
allowed in the area where a cut-off 
machine is in use. Never let the cut-off
machine run unattended.

Do not lend or rent your cut-off machine
without the Owner’s Manual. Be sure
that anyone using your cut-off machine 
understands the information contained

in this manual. Employers should estab-
lish a training program for operators of 
gasoline powered, hand held portable,
cutt-off machines to assure safe oper-
ation of these machines. These safety 
precautions and warnings apply to the
use of all STIHL Cutquiks

TM

.

Different models may have different
parts and controls. See the appropriate
section of your owner’s manual for a 
description of the controls and function
of the parts of your model cut-off 
machine.

Safe use of a cut-off machine involves
- the operator 
- the cut-off machine 
- the use of the cut-off machine.

7+(23(5$725

3K\VLFDO&RQGLWLRQ

You must be in good physical condition
and mental health and not under the 
influence of any substance (drugs. 
alcohol, etc.) which might impair vision,
dexterity or judgement. Do not operate a
cut-off machine when you are fatigued.
Be alert - if you get tired while operating
your cut-off machine, take a break, tired-
ness may result in loss of control.
Working with any cut-off machine can be 
strenuous. If you have any condition that
might be aggravated by strenuous work,
check with your doctor before operating
a cut-off machine.

:DUQLQJ

Prolonged use of cut-off machines (or 
other machines) exposing the operator
to vibrations may produce whitefinger 
disease (Raynaud’s phenomenon) or
carpal tunnel syndrome. These 
conditions reduce the hand’s ability to
feel and regulate temperature, produces
numbness and burning sensations and
cause nerve and circulation damage and
tissue necrosis. All factors which contri-
bute to whitefinger disease are not
known, but cold weather, smoking and
diseases or physical conditions that 
affect blood vessels and blood transport,
as well as high vibration levels and long
periods of exposure to vibration are 
mentioned as factors in the development
of whitefinger disease. In order to 
reduce the risk of whitefinger disease
and carpal tunnel syndrome, please
note the following:

-

Most STIHL cut-off machine models 
are available with an anti-vibration
("AV") system designed to reduce
the transmission of vibrations 
created by the engine to the 
operator’s hands. An AV system is
recommended for those persons
using cut-off machines on a regular
or sustained basis.

-

Wear gloves and keep your hands
warm.

-

Keep the AV system well maintained.
A cut-off machine with loose 
components or with damaged or

6DIHW\3UHFDXWLRQV

76

Содержание TS 350



































Отзывы: