Stihl SE 133 ME, Инструкция по эксплуатации

Страница: 13 / 32

0458-660-0121-A
11
English 5 Preparing the wet/dry vacuum cleaner for use
￭ If compressed air is used to clean the wet/dry vacuum
cleaner or the filters, dust which is harmful to health may
be raised and breathed in. Inhaling dust can be harmful to
health and trigger allergic reactions.
► Clean the wet/dry vacuum cleaner and filters as
described in this Instruction Manual.
￭ If the wet/dry vacuum cleaner is not properly serviced or
repaired, parts may not function correctly and safety devices
can be disabled. People can be seriously injured or killed.
►
Do not attempt to service or repair the wet/dry vacuum
cleaner yourself.
► If the connecting cord is faulty or
damaged: Have the connecting cord
replaced by a STIHL servicing dealer.
► If the wet/dry vacuum cleaner needs to be serviced or
repaired: Contact a STIHL servicing dealer.
5.1 Preparing the wet/dry vacuum cleaner for use
The following steps must be carried out every time before
starting work:
► Make sure that the wet/dry vacuum cleaner and the
connecting cord are in a safe condition,
@
4.6.
► Clean the wet/dry vacuum cleaner,
@
13.1.
► Attach the suction hose,
@
6.4.1.
► Check the filter,
@
8.1.
► Check the cooling air filter,
@
8.2.
► If using an accessory: Fit accessory,
@
6.6.
► Plug the mains plug of the wet/dry vacuum cleaner into an
easily accessible socket.
► If it is not possible to carry out these steps: Do not use the
wet/dry vacuum cleaner. Consult a STIHL servicing
dealer.
6.1 Assembling the wet/dry vacuum cleaner
The accessory supplied is inside the cardboard box and
inside the container.
► Release the container locks (1).
► Lift off the top part (2).
► Remove accessory.
► Replace top part (2) in position.
► Fasten the container locks (1).
Fitting the holder for the connecting cord or the suction hose
► Undo screws (1).
► Fit holder (2).
5 Preparing the wet/dry vacuum cleaner
for use
6 Assembling the wet/dry vacuum
cleaner
0000-GXX-3965-A0
1
2
1
0000-GXX-3967-A0
1
2
2
1
1
1
T 20