0478-131-3050-A
112
español / EE.UU
10 Instalación del robot cortacéspedes
7. Alarma antirrobo
Cuando la característica antirrobo está activada:
– Suena una alarma cuando el robot cortacéspedes es
levantado, a no ser que el código PIN se introduzca en un
intervalo no mayor a un minuto,
– Si remplaza la estación de carga o el robot cortacéspedes
después de completar la primera instalación, necesitará
enlazar el robot cortacéspedes con la estación de carga
antes de utilizarlos,
8. Protección de GPS
Para detección de robo, STIHL recomienda activar la
característica de protección de GPS. Cuando la protección
de GPS está activada:
– El propietario registrado del robot cortacéspedes será
notificado a través de la app iMow si la unidad es
desplazada a una distancia mayor de 1640 ft (500 m) del
perímetro de la superficie a cortar establecida,
– Cuando se ajusten los niveles de seguridad baja, mediana
o alta, el robot cortacéspedes podrá ser utilizado fuera de
la superficie a cortar establecida solo después de que el
código PIN haya sido introducido,
10.1 Preparación del césped y del robot
cortacéspedes para el funcionamiento
Para preparar el césped para el tendido del cable
perimétrico:
► Corte el césped con un cortacésped convencional. La
altura ideal del césped son 2.4 pulg. (6 cm) o menos.
► Si la superficie está seca y dura, riegue ligeramente la
superficie a cortar para facilitar el manejo de las estacas
del cable perimétrico.
► STIHL recomienda tender el cable perimétrico a una
distancia de por lo menos 11 pulg. (28 cm) de obstáculos
o del borde exterior del jardín,
11. Esto hará que el
funcionamiento continuo de su robot cortacéspedes sea
más probable. Puede reducir las áreas sin podar
tendiendo el cable perimétrico a una distancia menor de
11 pulg. (28 cm) de los obstáculos, pero el éxito del
tendido dependerá de las características específicas de
su jardín,
► Cuando haya más de una superficie a cortar establecida,
mantenga una distancia mínima de 3.3 pies (1 m) entre
los cables perimétricos de las dos zonas de vecino A y
vecino B.
Para preparar el robot cortacéspedes para el
funcionamiento, siga el asistente de instalación integrado.
Este lo guiará a través de la primera instalación del robot
cortacéspedes:
► Ajuste la hora y la fecha en el robot cortacéspedes,
► Instale la estación de carga,
► Tienda el cable perimétrico,
► Conecte el cable perimétrico a la estación de carga,
► Enlace el robot cortacéspedes con la estación de carga,
► Revise la instalación,
► Programe el robot cortacéspedes y cree un plan de corte
► Complete la primera instalación y comience el corte,
10 Instalación del robot cortacéspedes
A
B