► Check the following points when storing the
battery:
–
Battery is out of the reach of children.
–
Battery is clean and dry.
–
Battery is in an enclosed location.
–
Battery is stored separately from the mower
and charger.
–
Battery is in non-conductive packaging.
–
Battery is in a temperature range between
-10°C and +50°C.
16 Cleaning
16.1
Placing the Lawn Mower in the
Cleaning Position
► Switch the lawn mower off, pull out the activa‐
tion key and remove the battery.
► Place the lawn mower on a level surface.
► Detach the grass catcher box.
► Hold the lawn mower at handlebar (1), tilt side‐
ways and set down.
16.2
Cleaning the Lawn Mower
► Switch the lawn mower off, pull out the activa‐
tion key and remove the battery.
► Clean the lawn mower with a damp cloth.
► Clean the discharge chute with a soft brush or
a damp cloth.
► Remove any foreign bodies from the battery
compartment and clean the battery compart‐
ment with a damp cloth.
► Clean the electric contacts in the battery com‐
partment with a paintbrush or a soft brush.
► Clean ventilation slots (1), (2) with a paint‐
brush.
► Upend the lawn mower.
► Clean the area around the blade and the blade
with a stick, a soft brush or a damp cloth.
16.3
Cleaning the Battery
► Clean the battery with a damp cloth.
17 Maintenance
17.1
Removing and Attaching the
Blade
17.1.1
Removing the Blade
► Switch the lawn mower off, pull out the activa‐
tion key and remove the battery.
► Tilt the lawn mower sideways and set it down.
► Hold blade (1) with one hand.
► Unscrew screw (2) in the direction of the arrow
and remove together with coupler (3).
► Remove blade (1).
► Discard screw (2) and coupler (4).
Use a new screw and new coupler to attach
blade (1).
17.1.2
Attaching the Blade
► Switch the lawn mower off, pull out the activa‐
tion key and remove the battery.
► Tilt the lawn mower sideways and set it down.
► Clean the blade contact surface and blade
bushing.
► Fit mowing blade (1) onto the blade bushing
with the curved wings pointing upwards.
► The locating lugs (4) on the blade bushing
must be located in the recesses in the mowing
blade.
► Hold mowing blade (1) with one hand and fit
new coupler (3).
16 Cleaning
English
0478-131-9541-B
15
