manualshive.com logo in svg

Stihl KA 120, Инструкция по эксплуатации

Поделиться
Скачать
Stihl KA 120 Скачать руководство пользователя страница 9

5.1.4

Fitting the Throttle Cable

NOTICE

Do not kink the throttle cable or lay it in tight radii

– make sure the throttle trigger moves freely.

15 14

14

15

15

250BA002

► Position the throttle cable retainer (15) and

throttle cable (14) against the drive tube.

► Close the throttle cable retainer (15). The

retainer (15) snaps into place.

5.1.5

Adjusting the Throttle Cable

► Check adjustment of throttle cable – see chap‐

ter on "Adjusting the Throttle Cable".

5.1.6

Swiveling the Handlebar

Transport position

3

7

90°

002BA650

► Loosen the wing screw (3) and unscrew it until

the handlebar (7) can be rotated.

► Rotate the handlebar 90° counterclockwise

and then swing the handles down.

► Tighten down the wing screw (3) firmly.
Working position

► Reverse the sequence described above to

swing the handles up and turn the handlebar

clockwise.

6

Adjusting the Throttle

Cable

A properly adjusted throttle cable is the precondi‐

tion for correct operation in the full throttle, start‐

ing throttle and idle positions.
Adjust the throttle cable only after the unit is fully

assembled – the control handle must be in the

normal operating position.

6 Adjusting the Throttle Cable

English

0458-516-0121-B

9

Содержание KA 120

























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды