manualshive.com logo in svg

Stihl GS 461, Инструкция по эксплуатации

Поделиться
Скачать
Stihl GS 461 Скачать руководство пользователя страница 21

2

241

1BA032 KN

1

► Lift the air baffle (1) up and off

► Unplug spark plug boot (2)

► Unscrew spark plug

16.2

Checking the Spark Plug

000BA039 KN

A

► Clean dirty spark plug.

► Check electrode gap (A) and readjust if neces‐

sary – see "Specifications".

► Rectify the problems which have caused foul‐

ing of the spark plug.

Possible causes are:

–

Too much oil in fuel mix.

–

Dirty air filter.

–

Unfavorable running conditions.

1

000BA045 KN

WARNING

Arcing may occur if the adapter nut (1) is loose

or missing. Working in an easily combustible or

explosive atmosphere may cause a fire or an

explosion. This can result result in serious inju‐

ries or damage to property.
► Use resistor type spark plugs with a properly

tightened adapter nut.

16.3

Installing the spark plug

1

241

1BA033 KN

2

► Install in the spark plug and tighten

► Press on the spark plug boot (1) firmly

► Insert the air baffle (2) from above

► Mount filter cover

17 Storing the Machine

If the machine is to remain out of use for approx.

3 months or more

► Drain and clean the fuel tank in a well ventila‐

ted place

► Dispose of fuel in accordance with the regula‐

tions and having regard for the environment

► Run the engine until the carburetor is dry, this

helps to prevent the carburetor diaphragms

sticking together

► Remove, clean and dry diamond abrasive

chain and guide bar, and spray with STIHL

multispray – in particular the bearing of the

sprocket nose – corrosion protection.

► Thoroughly clean the machine - pay special

attention to the cylinder fins and air filter

► Store machine in a safe and dry place. Protect

against unauthorized use (e. g., by children)

17 Storing the Machine

English

0458-761-0121-B

21

Содержание GS 461

































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды