Stihl 4141 Series, Руководство пользователя

Страница: 32 / 43

31 Series 4141 Powerhead
Thread other end of rope through
the "ElastoStart" grip (1) and
spring (2). Secure with a simple
overhand knot.
Pull rope with spring back into the
"ElastoStart" grip. Fit cap (3).
VA
380RA065
3
1 2
– Tension the rewind spring - see
7.4.2.
– Install the rewind starter - see
7.2.
Take out the screw.
392RA083
VA
Use screwdriver (1)
5910 890 2301 (1) to remove
screws.
– Separate the two halves of the
handle.
392RA084
VA
1
Lift the interlock lever (1) slightly
and turn it to one side until the
torsion spring (2) is relaxed.
Pull the interlock lever and
torsion spring off the peg.
392RA085
VA
1
2
Take the throttle trigger (1) with
torsion spring (2) and throttle
cable (3) off the peg.
392RA087
VA
1 2
3
Disconnect throttle cable from
trigger.
Reassemble in the reverse
sequence.
Pay attention to the following points
during installation.
392RA088
VA
Attach the throttle cable, then
position torsion spring as shown
and push its long arm into the
slot.
392RA089
VA
8 Throttle Control
8.1 Throttle Trigger/Interlock Lever