Stihl 4137 Series, Руководство пользователя, Страница: 22 / 58

21 Series 4137 Components - HT
:
Thread the starter rope through
the hole in the side of the rotor.
– Secure the rope with a simple
overhand knot.
VA
936RA050
:
Pull the rope back into the rotor
until the knot locates in the
recess.
:
Press the end of the rope into the
slot.
– Install the rope rotor,
b
6.3
VA
936RA051
– Tension the rewind spring,
b
6.4
Install all other parts in the reverse
sequence.
– Unscrew the spark plug and
block the piston with the locking
strip 0000 893 5903,
b
5.2
– Remove the rewind starter,
b
6.2
:
Unscrew the carrier from the
VA
936RA053
crankshaft.
:
Squeeze the ends of the pawl’s
peg together.
– Take the pawl out of the carrier.
VA
936RA054
:
Take the torsion spring (arrow) off
the pawl.
VA
936RA055
:
Push the torsion spring over the
new pawl.
VA
936RA056
:
Fit the pawl (1) in the hole in the
carrier.
:
The long leg (2) of the torsion
spring must locate against the
carrier and the short leg (3)
against the pawl.
VA
936RA057
1
3
R
2
6.7 Carrier/Pawl