Stihl 4137 Series, Руководство пользователя, Страница: 21 / 58

20 Series 4137 Components - HT
– Remove the rewind starter,
b
6.2
– Remove the remaining rope from
the rope rotor if necessary.
:
Pry the cap out of the starter grip.
– Pull the rope out of the starter
grip.
VA
936RA018
:
Thread end of new rope through
the starter grip, from the bottom
to the top.
– Tie a simple overhand knot in the
end of the rope.
VA
936RA019
:
Pull the rope back so that the
knot locates in the starter grip.
– Refit the cap in the starter grip.
– Tension the starter rope,
b
6.4
– Install the rewind starter,
b
6.2
VA
936RA020
The ElastoStart starter grip is
supplied with starter rope.
– Remove the rewind starter,
b
6.2
– Remove the rope rotor,
b
6.3
– Pull the knot out of the recess in
the rope rotor.
:
Undo the knot and pull the rope
out of the rotor and the starter
mechanism.
VA
936RA048
:
Thread the new starter rope
through the rope guide bushing
from outside.
VA
936RA049
6.5 Starter Rope 6.6 Starter Grip