oPerATIoN
Cleaning, care and maintenance
www.stiebel-eltron.com
HSBC 300 cool | HSBC 300 L cool |
35
EN
GL
ISH
5. Cleaning, care and maintenance
f
f
Have the electrical safety of the appliance and the function
of the safety assembly regularly checked by a qualified
contractor.
f
f
Never use abrasive or corrosive cleaning agents. A damp
cloth is sufficient for cleaning the appliance.
Signal anode with consumption indicator
!
Material losses
If the consumption indicator changes colour from white
to red, have the signal anode checked by a qualified con-
tractor and if necessary replaced.
D
00000
80
28
1
1
2
1 White = Anode OK
2 Red = Requires checking by qualified contractor
Scaling
Almost every type of water will deposit limescale at high temper-
atures. This settles inside the appliance and affects both perfor-
mance and service life. A qualified contractor who knows the local
water quality will tell you when the next service is due.
f
f
Check the taps regularly. Limescale deposits at the tap out-
lets can be removed using commercially available descaling
agents.
f
f
Regularly activate the safety valve to prevent it from becom-
ing blocked, e.g. by limescale deposits.
6. Troubleshooting
Problem
Cause
remedy
The water does not heat
up. The heating does not
work.
There is no power.
Check the fuses/MCBs in
your fuse box/distribu-
tion board.
If you cannot remedy the fault, contact your qualified contractor.
To facilitate and speed up your request, provide the number from
the type plate (000000-0000-000000).
No.: 000000-0000-000000
Made in Germany
D
00000
80
28
0
