STIEBEL ELTRON DHE 18 AU Скачать руководство пользователя страница 4

OpErATiON 

 

General information

4

 | DHE  AU 

www.stiebel-eltron.com

OpErATiON

1.  General information

The chapters "Special information" and "Operation" are intended 

for both users and qualified contractors.
The chapter "Installation" is intended for qualified contractors.

 

Note

Read these instructions carefully before using the appli-

ance and retain them for future reference.

Pass on these instructions to a new user if required.

1.1  Safety instructions

1.1.1  Structure of safety instructions

!

 

KEYWORD Type of risk

Here, possible consequences are listed that may result 

from failure to observe the safety instructions.

f

f

Steps to prevent the risk are listed.

1.1.2  Symbols, type of risk

Symbol

Type of risk

 

 

Injury 

 

 

 

Electrocution 

 

 

 

Burns

(burns, scalding) 

1.1.3  Keywords

KEYWOrD

meaning

DANGER 

Failure to observe this information will result in serious 

injury or death.

WARNING 

Failure to observe this information may result in serious 

injury or death.

CAUTION 

Failure to observe this information may result in non-seri-

ous or minor injury.

1.2  Other symbols in this documentation

 

Note

General information is identified by the adjacent symbol.

f

f

Read these texts carefully.

Symbol

meaning

 

 

Material losses

(appliance damage, consequential losses and environmen-

tal pollution)

 

 

Appliance disposal 

 

f

f

This symbol indicates that you have to do something. The ac-

tion you need to take is described step by step.

1.3  Units of measurement

 

Note

All measurements are given in mm unless stated oth-

erwise.

2.  Safety

2.1  Intended use

This appliance is suitable for heating domestic hot water or for 

reheating preheated water. The appliance can supply one or more 

draw-off points.
Water will not be reheated if the maximum inlet temperature for 

reheating is exceeded.
The appliance is intended for domestic use. It can be used safely 

by untrained persons. The appliance can also be used in non-do-

mestic environments, e.g. in small businesses, as long as it is 

used in the same way.
Any other use beyond that described shall be deemed inappro-

priate. Observation of these instructions and of the instructions 

for any accessories used is also part of the correct use of this 

appliance.

2.2  General safety instructions

 

CAUTION Burns

If using preheated water, the fitting can reach a temper-

ature of up to 70 °C during operation. There is a risk of 

scalding at outlet temperatures in excess of 43 °C.

 

CAUTION Burns

If operating with preheated water, e.g. from a solar ther-

mal system, the DHW temperature may vary from the 

selected set temperature.

!

!

Содержание DHE 18 AU

























Отзывы: