8
ASSEMBLE INSTRUCTIONS
STEP 13
a. Loosen the
Screw (M3x10mm) (74)
at the
bottom on the console by using the
combination wrench to open the
Battery
Door (20).
b. The
Console (17)
operates with
FOUR
AA
rechargeable batteries, four batteries are
included in the hardware box.
c. Install rechargeable batteries into the
Console (17).
Make sure the location of positive or
negative battery terminal is correct.
d. Attach the
Battery Door (20)
onto the back
of the
Console (17
) and secure with the
Screw (M3x10mm) (74).
STEP 14
a. Connect the
Upper Pulse Sensor Wire (111)
to the
Middle Pulse Sensor Wire (112).
b. Connect the
Upper Connection Wire (108)
to the
Middle Connection Wire (109).
NOTE:
The number of wire pin should be the same for both wires to connect with as the following illustration
shown.
STEP 15
a. Place the
Console (17)
onto the
Upright Post (4)
and secure with the
Screw, Round Head
(M5xp0.8x15mm) (80).
b. Attach the
Console Lower Case (19)
to the
Console (17)
under the
Stationary Handlebar (5)
and secure
with the
Screw, Round Head (M5xp0.8x15mm) (80).
STEP 16
Slide the
Console Bracket (18)
onto the
Console (17)
and secure with the
Screw, Round Head
(M5xp0.8x15mm) (80).
STEP 17
NOTE:
For shipping purpose, the
Screw, Round Head (M5xp0.8x15mm) (80)
are
attached on the
Upright Post (4).
a. Remove the
Bolt, Button Head (M8xp1.25x15mm) (80)
from the
Upright Post (4).
b. Attach the
Accessory Tray (23)
onto the
Upright Post (4)
and secure with the
Screw, Round Head (M5xp0.8x15mm) (80).
CAUTION: The machine is suitable for
Nickel-Metal Hybird / NI-MH
rechargeable batteries only.
To prevent from any damages,
general or other type of batteries
are not allowed to use.
Содержание PR-7505
Страница 16: ...PRODUCT PARTS DRAWING ...
