background image

Low Voltage

Decorative 9 Ft LED 

Garland

CUSTOMER SERVICE

[email protected]

5021-GL29949-BIL_102319

1.

Assembly of the garland

1.1  

Carefully remove the garland from its protective packaging.

1.2

  

Unfold branches until the desired effect is obtained.

2.

Connect the Transformer and the Wire

2.1 

Connect the wire to the power pack.

 

2.2 

Screw the watertight connector by turning clockwise.

 

2.3

 Plug the power pack into the GFCI receptacle.

Warning: Risk of fire and shock

WARNING - To reduce the risk of FIRE OR INJURY TO PERSONS: 

Risk of electric shock. Install 10 feet (3.05 m) or more from a pool, spa or fountain. 

• Install in accordance with all local codes and ordinances. Only for use with the provided power unit.  

• The plug is polarized. To prevent electric shock, match wide blade of plug to wide slot, fully insert. 

• Never use with an extension cord unless plug can be fully inserted. Do not alter the plug. 

• Do not cover this product as the covering may cause the flexible light to overheat and melt or ignite. 

• Do not use if there is any damage to the light or cord insulation. Inspect periodically. 

• Do not puncture, cut, shorten, or splice the flexible light. 

• Do not route the cord or flexible light cable through walls, doors, windows or any like part of the building structure. 

• Do not submerge flexible light in liquids. 

• Do not secure this product or its cord with staples, nails, or like means that may damage the insulation. 

• Do not install on gates or doors, where subject to flexing. 

• Do not install in cabinets, tanks or enclosures of any kind.

CAUTION: Ground Fault Circuit Interrupter (GFCI) protection should be provided on the circuit or outlet. 

CAUTION: Use only outdoor extension cords, such as type SOW, STW, SJOW or SJTW.

READ, FOLLOW AND SAVE THESE INSTRUCTIONS

LISEZ, SUIVRE ET CONSERVEZ CES INSTRUCTIONS

MODEL/

MODÈLE

 #GL29949

Отзывы: