Steris InnoWave Pro, Руководство оператора

Страница: 121 / 200

CAUTION
In the interests of health and safety, all medical washers should be cleaned as
part of a routine maintenance program. This will ensure that the equipment is
safe for operators and maintenance personnel. To keep your equipment
operating within the design parameters, the following checks must be
performed on a regular basis. Please note that the completion of these
checks is not a substitute for regular servicing and maintenance by a suitably
qualified technician.
9.2 Daily Cleaning and Inspection
The cleaning and inspection described below is a general guide for use. The
equipment owner should review and set a cleaning and inspection procedure that is
appropriate for their frequency and manner of use.
WARNING — Pinching hazard
Pinch points are created during carrier operation.
l
ALWAYS keep hands clear when opening or closing the carrier.
l
In the unlikely event of an uncontrolled fault, the emergency stop button
can be pushed to cut power to the carrier and other motorized parts.
WARNING
l
ALWAYS wear appropriate Personal Protective Equipment (PPE)
whenever removing baskets from the carrier and tank.
l
In instances of body contact with chemical, ALWAYS follow emergency
procedure given in that chemical's SDS or call emergency services.
1. If the tank is full, due to the use of the rewash function, the tank should first be
emptied by aborting the wash cycle, or choosing to end the rewash. See
On
Completion of a Rewash Cycle on page 105 and Pausing or Aborting a Wash Cycle
on page 99.
MAINTENANCE 111
InnoWave Pro Sonic Irrigator Operator Manual