Steris InnoWave Pro, Руководство оператора

Страница: 105 / 200

Additional icons in center of display give information on activity within the wash stage:
Symbol Meaning
Represents the inlets to tank. Blue represents cold water inlet, red
represents hot water inlet, yellow represents chemical inlets. Green
represents RO water inlet (if configured). When an inlet is open,
allowing fluids into tank, a "stream" is shown under the inlet operating.
Represents the detected water level inside tank. As equipment fill and
drains tank, display will update to indicate one of three detected
levels; low, minimum, top. This is a general indication only and does
not represent actual physical height of water inside tank.
When shown, indicates that nozzles in lid are operating, spraying
cleaning fluids down over instruments in basket. Additionally
Spraying is shown as the current action on display (see ' G ' on Figure
7.1).
When shown, indicates that circulation pump is operating, pushing
cleaning fluids through basket manifold and any instruments
connected to flush ports. Additionally
Flushing is shown as the
current action on display (see ' G ' on Figure 7.1).
When shown, indicates that ultrasonic transducers are operating.
When ultrasonic transducers are operating to remove gases in
washing water,
Degassing is shown as current action on display.
When ultrasonic transducers are operating to create cavitation on the
surface of submerged instruments,
Sonics is shown as current action
on display (see '
G
' on Figure 7.1).
PERFORMING A WASH CYCLE 95
InnoWave Pro Sonic Irrigator Operator Manual