![Steris Hausted Horizon 4D2 Скачать руководство пользователя страница 8](http://html.mh-extra.com/html/steris/hausted-horizon-4d2/hausted-horizon-4d2_operating-manual_1374344008.webp)
2-1
Unpacking Instructions
Operator Manual
069389
UNPACKING INSTRUCTIONS
2
IMPORTANT:
Report any shipping damage immediately! Inform shipper of
any damages, and leave carton intact. Leave the stretcher in receiving area until
inspection is complete.
Your Hausted
®
Horizon
®
Multi-Purpose Stretcher has been carefully packaged
at our manufacturing plant to ensure safe shipment to you medical facility. There
are several procedures you must follow to put your new stretcher into service.
These procedures only take a few minutes to complete and are required to
ensure proper operation of the stretcher.
Step 1
– Cut the two bands around the shipping carton.
Step 2
– Remove the top half of the carton and cut one side of the bottom half.
Step 3
– Remove the stretcher from the carton. Cut the bands from around the
stretcher.
Step 4
– Check to see if all features of the stretcher work properly.
NOTE: You must first plug the unit into a wall socket to check any
electric features, as the battery has not been charged (see Step 6).
If all features work properly, go to step 5. If any of the features of the
stretcher do not work properly, call STERIS for service.
Step 5
– Clean the stretcher using a mild detergent to remove any dirt
accumulated during shipment.
Step 6
– Plug the unit into a wall socket to charge for approximately 8 hours
to charge the battery backup.
Step 7
– Place the unit into service.
WARNING – LACERATION
HAZARD: When cutting
bands always use a tool spe-
cifically designed for that
purpose. This will help to
avoid personal injuries fre-
quently incurred when
bands are cut and tension
released.