6
Power on
1. Turn on the unit using the switch on the side.
2. The screen will display the current set
temperature (the one that was set in last use)
for 3 seconds. After that, it will display the actual
temperature in °C or °F, as selected.
Temperature adjustment
Under normal working conditions, by pressing and holding
▲ or ▼,
you can either increase
or decrease the temperature quickly; once the digits are blinking, you can adjust step by step
by short pressing each button.
Temperature unit exchange
When the soldering iron is off, turn it on while holding “#” to switch between °C and °F
Alarm
When “H-E” or “S-E” is displayed on screen, there is something wrong with heating element or
circuit. Contact a technician to replace heating element.
Quickly adjusting temperature
- You can quickly adjust working temperature using the programmable buttons. Press one of
these buttons to set the stored temperature.
- To store a temperature press # and a button (1, 2 or 3), hold the # button until the number
on the screen changes, the temperature will be stored. Next time you press the button, the
soldering iron will be set at the stored temperature.
2A
