Stengel MO OUTDOOR, Инструкция по эксплуатации

Страница: 8 / 11

7
Please note:
- The surface must always be kept clean and accessible to the air.
- Under any deposit’s corrosion can occur.
- Traces of use and residues of cleaning agents and salt water must be removed immediately.
-
The surface should remain undamaged. Damage caused by hard metal objects must be
avoided. Residues of ferrous water can also lead to corrosion, as can contact with rusting
steel or iron parts.
Principles of caring for your kitchen
Light soiling can be removed with warm water with the addition of a mild detergent. Only use
cleaning agents without active chlorine for cleaning. Avoid scouring powders of any kind as well as
cleaning agents containing chlorine or other bleaching agents. After each cleaning, a thorough rinsing
with clear water is necessary. Finally, the stainless steel surfaces must be dried. Ground stainless
steel surfaces can be cleaned with standard cleaning agents, in stubborn cases even with Scotch-
Brite. It is important to ensure that rubbing takes place in the direction of grinding. Any extraneous
rust must be removed immediately with a mild abrasive cleaner
Cleaning recommendation for powder-coated surfaces
Light soiling:
Powder-coated surfaces should always be cleaned with a soft dry cloth.
If soiling cannot be removed in this way, the cloth can also be moistened, if necessary by adding a
pH-neutral cleaner.
Heavy soiling:
Heavily soiled surfaces can be cleaned with slightly abrasive cleaning agents, similar to car polish.If
the use of a strong cleaning agent is unavoidable, we recommend checking the suitability of the
agent in advance at a concealed location. The cleaning agents must not damage the coating
mechanically or chemically and must be free of solvents that could peel off the paint. No strongly
alkaline, acidic, chlorine-containing or scratching substances may be used. After each cleaning, a
thorough rinsing with clear water is necessary. Finally, the kitchen should be dried with a soft cloth. It
is not possible to accept liability for damage caused by improper cleaning.
We recommend to treat all stainless steel surfaces with a stainless steel care
product at regular intervals after removing the protective foil (if present)!