email: [email protected]
2
MK-16 RGBWT / MK-50 RGBWT
User manual
Safety notices
Electrical work safety advice and tips
●
Make sure the input voltage is correct.
●
Avoid placing the light engine in the rain or in moist areas. Please ensure that the light engine has
sufficient ventilation and is not placed in a completely sealed area.
●
Do not open the LED light engine for inspection or re-wire the electronic circuits if you are not a
professional. Opening the light engine might void your warranty.
●
Avoid any debris on top or around the light engine as it can cause poor heat dissipation.
●
Avoid using the device above 40 C temperature.
DIY tips and safety advice
●
This task will involve working at height. A safe system of work should be established and maintained, in
order to prevent injury.
●
Consider your safety! Think about the potential risks and dangers of the work and the steps you should
take to avoid them.
●
Personal protective equipment. Make sure that you are equipped with suitable and sufficient personal
protective equipment. This could include eye protection, face mask, protective overalls, safety footwear
and gloves.
●
Ensure that the work area is sufficiently illuminated.
●
Check that the tools you will be working with are in a good operating condition. For the installation,
you will need a cordless drill, epoxy glue, side cutters or scissors and drill bits.
