stellar labs 96-10-24, Руководство пользователя

Страница: 14 / 38

Page 8 | Stellar
®
96-10-24 Shuttle Owner’s Manual
Mounting Kit - PN 1022
22
1
1
3
2
3
2
4
ITEM PART DESCRIPTION QTY.
1 24868 NUT 0.63-11 HHGR8 NYLOCK ZY 16
2 C5902 WASHER 0.63 SAE FLAT YELLOW GR8 32
3 C1026 CAP SCR 0.63-11X2.50 HHGR8 ZY 16
4 D0143 TIE DOWN CHANNEL 8
PN 1022
• See NHTSA (National Highway Truck Saftey Administration) Regulations for acceptable
placement.
• Modify the truck frame as necessary so that it ends 2” from the rear of the hooklift.
Step 5: Install bumper.
2.00
See brand specific installation instructions.
• Before drilling and bolting to the frame, confirm adequate room for cable routing be-
tween in-cab controls and the valve bank. Note: The top of the reservoir should not be
above the truck frame. Refer to the Reservoir Assembly Drawings for details.
Step 6: Install tarper tower (If applicable).
Step 7: Install hydraulic reservoir and valve bank.