STEINWAY LYNGDORF Steinway & Sons Model C, Руководство по установке

Страница: 9 / 13

Steinway & Sons Model C – Installation Manual, version 2.1 9
Left Side / Stereo Setup
An Model A1 amplifier is powering the Model C speaker. The amplifier is
mounted together with the crossover for the mid-high section in a chassis,
which is fixed to the top of the box with two M4 screws.
The adapter cable to the amplifier is included with the speaker, and you need
to connect the Model A1 to your processor through a Steinway Link cable.
The Model A1 amplifier must be connected to your local mains power supply.
Make sure to set the voltage selector to the correct setting before turning the
system on.
The dip switch on the Model A1 must be:
The switch 8 is activated, as the link is terminated - as in this suggested setup, the speakers are on
separate link outputs, and not connected as a daisy chain to a single link output.
The adaptor cable configuration:
ID#0
LEFT