STEINWAY LYNGDORF Steinway & Sons Model C, Руководство по установке

Страница: 8 / 13

Steinway & Sons Model C – Installation Manual, version 2.1 8
CONNECTION OF EQUIPMENT
Speaker Cable Wiring
The Model C Speaker holds an A1 amplifier in the box behind the speaker. The amplifier connects to the
speaker through wires fitted with speakON connectors.
A1 DIP Switchboard Addressing
The DIP switchboard on the back of each A1 amplifier
must be set for correct identification of the speaker
connected to it. See next page for traditional stereo setup.
If the speakers are part of a multi-channel setup, you will
receive a wiring diagram dedicated to your specific setup.
Daisy-Chaining
The two Model A1 amplifiers can be connected in Daisy-Chain – one cable from LINK A output from the
processor to Steinway Link IN on the first A1 amplifier (ID#0) – one cable from Steinway Link OUT on the first
A1 amplifier (ID#0) to Steinway Link IN on the second A1 amplifier (ID#1)
DIP 8 must be adjusted for either termination or transmission. Switch DIP 8 to lower position on the first A1
amplifier (ID#0). Switch to upper position on the second A1 amplifier (ID#1).