12
Warning:
Usage of maximum volume setting is highly recommended to prevent damage to
equipment because of too loud volume setting! It is never possible to set the volume above the
maximum volume level setting with control interface commands, but it is very easy to accidentally
reach the maximum volume level.
Controlling sources
Main zone:
A source is a combination of video input and audio input that can be selected freely from the user
interface. The number and names of sources can vary depending on how many sources have been
created when setting up the system. The installer can add, delete, edit and re-order the sources at
any time.
Command
!SRCS?<CR>
is used to find out how many sources there are and what are their names.
For example a response for
!SRCS<CR>
could be:
!SRCCOUNT(4)<CR>
!SRC(0)"DVD player"<CR>
!SRC(1)"Blu-ray player"<CR>
!SRC(2)"Game console"<CR>
!SRC(3)"PVR"<CR>
It can be seen from the response that there are 4 sources, named “DVD player”, “Blu-ray player”,
“Game console” and “PVR”.
Command
!SRC?<CR>
is used to find out which source is currently selected. The response for this
command is
!SRC(X)”NAME”<CR>
where
X
is the index of the currently selected source (0 is the
first index) and
NAME
is the name of the currently selected source.
Commands
!SRC+<CR>
and
!SRC-<CR>
are used to select next or previous source. Command
!SRC(X)<CR>
is used to select a specific source. The
X
in the command can be anything between 0
and the index of the last source. This response is also send automatically, when the source changes,
if feedback level is 1 or higher. If main zone is off, the P200 will reply with the previous selected
source.
Zone 2:
Sources on zone2 are a subset of the sources set up for main zone. Command
!ZSRCS?<CR>
is
used to find out the indexes and names of the zone sources. For example a response for
!ZSRCS?<CR>
could be:
!ZSRCCOUNT(5)
!ZSRC(0)"Follow Main"<CR>
!ZSRC(1)"CD player"<CR>
!ZSRC(2)"SACD player"<CR>
