STEINWAY LYNGDORF M страница 21 Скачать руководство пользователя

Страница: 21 / 21

SERVICE INFORMATION

In order to obtain warranty service you must contact your original dealer or the Steinway Lyngdorf

distributor of the region or country where you are located. If you have trouble locating an authorized

representative, please contact the Steinway Lyngdorf Customer Service Department using the contact

information at

www.steinwaylyngdorf.com

or you may email [email protected].

Steinway Lyngdorf

Ulvevej 28

DK 7800 Skive

Denmark

Service Hotline: +45 4084 2230

Fax: +45 9614 5601

In some cases, the Customer Service Department may solve a service problem without the need of

repair or any other measures, thereby avoiding further inconvenience or delay. In some cases it may

be necessary to return the equipment to Steinway Lyngdorf or an authorized service provider for

repair; therefore, it is recommended that you save your original packing materials. Steinway Lyngdorf

will not be responsible for any damage due to unauthorized packing or shipment in non-original

packing materials. If return is made in authorized packaging, risks are borne by Steinway Lyngdorf.

Additional charges may occur if new packing materials are required for return shipment.

Содержание M






















Результаты поиска

Содержание M

Отзывы:

Похожие инструкции для M

Бренды по названию

Популярные бренды

STEINWAY LYNGDORF M, Руководство по установке

Результаты поиска

Содержание M

Отзывы:

Похожие инструкции для M

Бренды по названию

Популярные бренды