STEINEL IR Quattro HD-2 DALI-2, Руководство пользователя

Страница: 13 / 18

- 12 - - 13 -
GB
1. About this document
– Please read carefully and keep in a
safe place.
– Under copyright.
Reproduction either in whole or in part
only with our consent.
– Subject to change in the interest of
technical progress.
Symbols
!
Hazard warning!
...
Reference to other information
in the document.
2. General safety precautions
Disconnect the power supply
before attempting any work
on the sensor.
• During installation, the electric power
cable being connected must not be
live. Therefore, switch off the power
first and use a voltage tester to make
sure the wiring is off-circuit.
• Installing the sensor involves work
on the mains power supply. This
work must therefore be carried out
professionally in accordance with
national wiring regulations and electri-
cal operating conditions.
• Only use genuine replacement parts
• Repairs may only be made by spe-
cialist workshops.
3. IR Quattro HD-2
DALI-2 IPD
Proper use
– Sensor for ceiling mounting indoors.
– Connection to a DALI bus system.
The IR Quattro HD-2 DALI-2 IPD
provides high-resolution, highly sensitive
motion detection. The square detection
zone can be set with absolute precision.
The sensor is particularly suitable for
offices, classrooms and large industrial
spaces.
UP: concealed version
AP: surface-mounted version
Package contents (Fig. 3.1, Fig. 3.4)
Product dimensions (Fig. 3.2, Fig. 3.5)
Product components (Fig. 3.3, Fig. 3.6)
A Surface-mounting adapter
B Load module
C Connecting terminal
D Sensor module
E
Reach adjustment
Detection zone (Fig. 3.7)
Technical specifications
– Dimensions (H × W × D)
Concealed (UP): 103 × 103 × 69 mm
Surface-mounted (AP):
123 × 123 × 64 mm
– Mounting height: 2.5-10 m
– Angle of coverage: 360°
– IR-Quattro HD-2 reach
(mounted at a height of 2.8 m):
presence 9 × 9 m
max. 24 × 24 m
– Sensor values: Light measurement,
Temperature: 0-40°C,
Relative humidity: 0-100%
!
GB