4
STEINDORFF
®
4.
Structure
(1) Objective
(2) Objective base
(3) Polarizer slot
(4) Microscope Body
(5) Focus stop screw
(6) Coarse limit screw
(7) Coarse adjustment knob
(8) Fine adjustment knob
(9) Eyepiece tube
(10) Eyepiece
(11) Analyzer Slot
(12) Illumination switch
(13) Power indicator.
(14)Recharge input port
(15) Illumination connector
(16) Microscope Base
5. Operation
According to the diagram shows, plug the eyepiece 10# into the eyepiece tube 9#, screw object
lens 1# into the lens holder 2#. When install the objective, users can remove the microscope base
16# and then screw it on. Then place the treated metallographic specimen in the microscope base
and adjust the focus knob to start observation, please turn on the power switch 12#, brightness can
be adjusted freely according to needs.