2
STEINDORFF
®
1.
Safety Precaution
1.1.
Carefully open the box, avoid the accessories, like lens, dropping to ground and being damaged.
1.2.
Check the input voltage, be sure the input voltage which signed on the microscope is consistent with the
power supply voltage, or it will bring a serious damage to the instrument.
1.3.
Do keep the instrument out of direct sunlight, high temperature or humidity, dusty and easy shaking
environment. Make sure the stage is smooth, horizontal and firm enough.
1.4.
To prevent the microscope body from turning over, its pivot angle must be limited to 30°.
1.5.
A microscope is a precision instrument. Handle it with care and avoid subjecting it to sudden or severe
impact.
1.6.
Make sure the instrument is earthed, to avoid lighting strike.
1.7.
Do not disassemble any part of the microscope, especially the electrical parts on the bottom side as this may
result in electric shock.
1.8.
Use the factory supplied power cord, please.
2.
Maintenance and Storage
2.1.
All the lenses have been well checked and adjusted. It is forbidden to disassemble them yourself.
2.2.
The binocular viewing head and focusing unit have a compact and precise frame; please don’t disassemble
them as possibly as you can.
2.3.
Keep the instrument clean, wipe dust regularly, and be attention to avoid contaminating the optical elements
especially.
2.4.
The contaminations on the prism, as fingerprint and oil, could be gently wiped with a piece of soft cloth or
tissue paper, gauze which has been immersed in pure alcohol or ether.
(Note that the alcohol and ether are highly flammable, keep them away from the fire or potential
sources of electrical sparks, and use them in a drafty room as possible as you can.)
2.5.
Do not attempt to use organic solvents to clean the microscope components other than the glass components.
To clean them, use a lint-free, soft cloth slightly moistened with a diluted neutral detergent.
2.6.
If the microscope is splashed by liquid during using, cut off the power at once, and wipe up the moisture.
2.7.
Do not disassemble any parts of the microscope, which will affect the function or decline the performance
of the microscope.
2.8.
Place the instrument in a cool, dry position. When not using the microscope, keep it covered with a dust
cover.
USER NOTICE
