Setting Up
UR242 Getting Started
11
En
gl
is
h
Turning the Power On and Standby
Power On
To turn the power on, press the [
] switch
(
O
). The [POWER] indicator on the front
panel lights.
Power Standby
To set to Standby, press the [
] switch
again (
N
). The [POWER] indicator light on
the front panel turns off.
CAUTION
• Even when the [
] switch is in the
standby position, electricity is still flowing
to the unit. If you do not plan to use the
unit for a while, be sure to unplug the AC
power adaptor from the outlet.
• Before turning the [
] switch on or
standby for all devices, set all volume
levels to minimum.
NOTICE
• Setting the [
] switch to on and standby
in rapid succession can cause it to
malfunction.
• After setting the [
] switch to standby,
wait for about six seconds before setting it
to on again.
• To avoid generating unwanted noise,
make sure there is adequate distance
between the power adaptor and the
device.
Setting Up
The following three setup procedures are
required before you can use the device with
a computer.
1. Installing TOOLS for UR242
2. Activating Basic FX Suite
3. Downloading Cubase AI (DAW)
1. Installing TOOLS for
UR242
Follow the steps below to install the TOOLS
for UR242.
NOTE
• You are only permitted to use this software
pursuant to the terms and conditions of the
“License Agreement” shown during the
installation.
• Future upgrades of application and system
software and any changes in specifications
and functions will be announced at the
following website.
http://www.steinberg.net/
• The eLicenser Control Center (eLCC) for
controlling the product license is installed at
the same time.
Windows
1.
Make sure that the computer is off
and the [
] switch is in the standby
position (
N
).
2.
Disconnect all USB devices other
than the mouse and keyboard
from the computer.
3.
Start the computer and log on to
the Administrator account.
Exit any open applications and close
all open windows.
4.
Insert the TOOLS for UR242 CD-
ROM into the CD-ROM drive.
5.
Open the CD-ROM then double
click [setup.exe].
