Software
UR-RT4 / UR-RT2 Operation Manual
19
Sweet Spot Morphing Channel
Strip
The Sweet Spot Morphing Channel Strip (“Channel Strip”
for short) is a multi-effect that combines compression and
EQ. Advanced sound engineering know-how is
condensed into a number of convenient presets that can
be simply and instantly recalled, for professional results.
Four channel strips are provided, and each can be
assigned to the monitor sound only, or to both the monitor
and recorded sound.
The Channel Strip equipped with the device and the
Channel Strip of the VST Plug-in version have the same
parameters. When using the Channel Strip on Cubase
series programs, you can share the settings between the
built-in Channel Strip and the Channel Strip of the VST
Plug-in version as a preset file. When using the built-in
Channel Strip on Cubase series programs, turn on the
[Direct Monitoring] setting in the program. Also, when
assigning the Channel Strip of the VST Plug-in version to
the effect slot on Cubase series programs, select it from
the [Dynamics] category (in the case of the default
settings). Note that you cannot use the built-in Channel
Strip when the sample rate is set to 176.4 kHz or 192 kHz.
Screenshot
How to Open the Window
From Dedicated Windows for Cubase Series
Select the “Channel Strip” from the “Effect Type”, then
click “Channel Strip Edit” in the section “Input Settings
Window” (
).
From dspMixFx UR-RT
Select the “Channel Strip” from the “Effect Type”, then
click “Channel Strip Edit” in the section “Channel Area”
(
).
Common to Compressor and Equalizer
1
MORPH
Adjusts the parameter of the Sweet Spot Data. You can
simultaneously adjust the compressor and equalizer
settings which are set to five points around this knob by
turning this knob. When you set the knob between two
adjacent points, the compressor and equalizer settings
will be set to an intermediate value.
2
Sweet Spot Data
Selects the Sweet Spot Data.
3
TOTAL GAIN
Adjusts the total gain of the Channel Strip.
Range:
-18.0 dB − +18.0 dB
4
Level Meter
Indicates the output level of the Channel Strip.
Compressor
1
ATTACK
Adjusts the attack time of the compressor.
Range:
0.092 msec − 80.00 msec
2
RELEASE
Adjusts the release time of the compressor.
Range:
9.3 msec − 999.0 msec
3
RATIO
Adjusts the release time of the compressor.
Range:
1.00 − ∞
1
2
4
3
1
3
2
)
4
5
7
6
8
9
!
Содержание UR-RT2
