Steinberg PPG 280 S, Руководство по эксплуатации, Страница: 36 / 56

2
Please inspect the device for damage occurred during transportation. In case of damage, the retailer has to be
informed immediately, at the latest within 8 days after the date of purchase.
2. Technical Data
Model PPG 280 S
Mains voltage / frequency 220 - 240 V~ 50 Hz
Nominal performance 280 Watt
Protection type IP68
Pressure port 19 mm / 11,89 mm female (1/4")
Max. flow rate (Q
max
)
1)
1.080 l/h
Max. pressure 6,0 bar
Max. delivery height (H
max
)
1)
60 m
Max. submersion depth

5 m
Min. submersion depth 0,5 m
Max. size of the solids being pumped 2 mm
Max. fluid temperature (T
max
) 35 °C
Max. cut-in frequency in one hour 30, evenly distributed
Length of connection cable 10 m
Cable type H05RN-F
Weight (net) ~ 3,5 kg
Min diameter wells 110 mm
Dimensions (L x D x H) 10 x 10 x 27 cm
Item no. 46042
1)
The values were determined with free, unreduced outlet.
Intermittent operation: The pump should pause after about 2 hours for 20 minute and may be put into straight operation more
than 12 hours.
3. Range of use
Submersible pressure pumpsfrom STEINBERG are specially designed and most efficient submersible pressure
pumps for discharging water from great depths. Owing to their compact design and professional technology,
these pumps can be used even in narrow bore-hole wells and shafts. These high-quality products with their
convincing performance data were developed for various applications involved with irrigation and for feeding on
the liquid being discharged under high pressure.
The units are suitable for discharging clean, clear water containing solids up to the maximum size specified in the
technical data.
The typical areas of use of a Submersible pressure pumpsinclude: Irrigation of gardens and garden beds,
domestic water supply with grey water from wells, cisterns and reservoir tanks, the operation of irrigation systems,
cleaning of terraces and sidewalks, discharge of water from great depths water extraction from great depths.
Submersible pressure pumpsfrom STEINBERG are suitable for permanent or temporary installations.
This product is intended for private use in the home area and not for commercial or industrial purposes or for
continuous circulating.
The device is not suitable for use in swimming pools or for the supply of drinking water.
The pump is not suited to discharge saltwater, faeces, inflammable, etching, explosive or
other hazardous liquids. Please observe the max. temperature of the liquids to be discharged
stated in the technical data.
4. Scope of delivery
The scope of the delivery of this product includes:
One pump with connection cable, one lowering rope, one operating manual.
Please verify that the scope of delivery is complete. Depending on the purpose of the application, additional
accessories may be necessary (please refer to the chapters titled "Installation"
, “Automation with special
accessories”and “How to order spare parts“).
If possible, keep the packing until the warranty period has expired. Please dispose of the packing materials in an
environmental-friendly manner.
34