Steinberg Nuendo Time Base, Руководство по эксплуатации, Страница: 69 / 92

TIME BASE
Service and Machine Pages 6 – 69
• Some Video machines do not show an image in Stop mode. This problem
can be solved by sending a Still command.
Parameter Explanation
Fun:
Function – A few user-definable Machine parameter commands.
ST Stop command is sent as such to the 9-pin Machine.
SL Stop command is sent as Still command (Pause) to the 9-pin Machine.
Sl Same as “SL” above. In addition, a Still command is sent after each Locate
command. This is for older machines that do not show an image after a
Locate.
Parameter Explanation
ÖÄ FF/REW commands are sent as FF/REW 9-pin commands.
S4
FF/REW commands are sent as Shuttle 4-fold 9-pin commands.
S8
FF/REW commands are sent as Shuttle 8-fold 9-pin commands.
V/L
Automatically read Time Code from 9-pin.
LTC Read LTC from 9-pin.
VITC Read VITC from 9-pin.
SV Servo detection active (standard setting).
SO Servo detection Off – (use only if the machine makes it necessary!).
A:3 Edit Advance parameter.
MA:P2 ID:004 Fun:ST S8 V/L SV A:3
Stat:Stop M=DVW-A500 Ö Ä > REC:OFF M.A