Steinberg Nuendo Time Base, Руководство по эксплуатации, Страница: 48 / 92

TIME BASE
5 – 48 Reference
VITC and Time Code Inserter – Display page P.2
Parameter Explanation
VIDEO: This is where the input and output for the VITC Reader/Generator
and the Time Code Inserter are selected.
BNC: The BNC input/output is active (Composite Video).
SVHS: The S-VHS input/output is active (Y/C or Component Video).
Parameter Explanation
VITC Vertical Interval Time Code. The Time Code is in the Video picture
in 2 Lines above the visible picture (blanking interval).
RL=
Readlines (Lines, that contain VITC).
AUTO
Time Base automatically finds both VITC lines.
xx xx
In special cases, both readlines can be manually set in the range from 10 to
40 (NTSC) or 6 to 36 (PAL).
Parameter Explanation
WL= “Write Lines” for VITC.
OFF The VITC Generator is switched off.
ON The VITC Generator is active in the “Playspeed” range.
STAN The VITC-Generator is always active, even during Stop or FF/Rew, and is
always producing code even when stationary or winding. A few non-linear
video systems need this type of synchronization.
xx xx
The two lines, in which the VITC is written.
VIDEO:BNC VITC RL=AUTO WL=OFF 19 21
INS:ON POS V125 H020 VIEW=WH/BL/SM P.2
VIDEO:BNC VITC RL=AUTO WL=OFF 19 21
INS:ON POS V125 H020 VIEW=WH/BL/SM P.2
VIDEO:BNC VITC RL=AUTO WL=OFF 19 21
INS:ON POS V125 H020 VIEW=WH/BL/SM P.2