Steinberg Nuendo Time Base, Руководство по эксплуатации, Страница: 42 / 92

TIME BASE
5 – 42 Reference
• The virtual 9-pin Machine can also be controlled by MMC commands.
❐
MMC control corresponds to direct operation (9-pin LOCAL + REMOTE are
active). This means, that all connected systems can simultaneously be con-
trolled from any of them, as long as the connected systems allow for this.
The difference between the various 9-pin emulations lies mainly in different
methods used for track selection and machine recognition. Operation with
most 9-pin Controllers (editing systems) is therefore possible.
• The 9-pin emulation only works with Video-Sync.
Parameter Explanation
VTM=_____
Time Base has been switched to Virtual Time Machine Mode -
The parameter TCIN= changes to VTM=.
VTM=M.V MIDI Virtual MIDI Machine.
Time Base behaves like a tape machine, that is controlled by MMC
commands. The LTC, MTC, VITC and VST System Link Generator is
active, and can e.g. be used for synchronization of VST System Link
host applications like Nuendo, LTC and VITC slaves.
Virtual MIDI Machine:
If you set CL: to V-SYNC, all Time Code outputs are in sync to video!
M.A BVW75 Time Base emulates a BVW75 on the 9-pin-interface A.
M.A DVW-A500 Time Base emulates a DVW-A500 on the 9-pin-interface A.
M.A PCM-3348 Time Base emulates a 3348 on the 9-pin-interface A.
M.A: -VTM9- Time Base emulates a 64 track audio machine on the 9-pin-
interface A.
FRM=25 VTM=M.A BVW75 SR=96.00
CL:V-SYNC TX=10:00:00:00 STOP P.1