Steinberg Nuendo Time Base, Руководство по эксплуатации, Страница: 15 / 92

TIME BASE
Features and Basic Settings 3 – 15
Basic Settings
Before each session, the following basic settings should be made or
checked. Both of the following settings would normally be set according
to the standard settings used in the respective country:
If the Time Base is being driven by video sync, the Time Code frame rate
will be automatically set to the video frame rate.
❐
The frame rate of the connected devices must be set to the same value!
❐
The Sample of synchronized devices must be set to the same value! When
you make the settings for a new Project in Time Base, Nuendo will automat-
ically recognize them. When you load a Project in Nuendo, Time Base will
automatically be set to the same settings.
Time Base
Display Page Parameter Explanation Options
P.5 SYS-VIDEO Video frame
rate E.g. 25 frames in Europe (PAL) or
29 frames in USA/Canada (NTSC).
P.1 FRM Time code
frame rate 25 frame (PAL), 29, or 29D (drop)
frames (NTSC).
Time Base
Display Page Parameter Explanation Options
P.1 SR
Sample rate The Sample Rate should be set to the
desired value for the project, and should
be maintained unchanged throughout
the whole project (e.g. 44.1 for CD, 48
for Video/Film, 192 for DVD Audio).