Turning the Power On and Off
Operation Manual
9
ENGLISH
Turning the Power On
and Off
1
To supply the power actually from the con-
nected host computer, press the [STANDBY/
ON] switch on the rear panel to set it to the
ON position.
2
To cancel the power supply from the con-
nected host computer, press the [STANDBY/
ON] switch to set it to the STANDBY posi-
tion.
CAUTION
• Note that a small amount of current continues to
flow while the switch is in the STANDBY position. If
you do not plan to use the CC121 for an extended
period of time, please be sure to unplug the adap-
tor from the wall outlet.
• As soon as you turn off the power of the computer
connected to the CC121, make sure to press the
[STANDBY/ON] switch of the CC121 to set it to the
STANDBY position.
Precautions when using the USB TO HOST
terminal
When connecting the computer to the USB TO
HOST terminal, make sure to observe the follow-
ing cautions. Failing to do so risks freezing the
computer and corrupting or even losing the data.
If the computer or the device freezes, restart the
application software or the computer OS, or turn
the power to the device off then on again.
CAUTION
• Use an AB type USB cable of 1.5 meters or
less.
• Before connecting the computer to the USB
TO HOST terminal, exit from any power-
saving mode of the computer (such as
suspended, sleep, standby).
• Before turning on the power to the device,
connect the computer to the USB TO HOST
terminal.
• Quit any open application software on the com-
puter before turning the power to the device on/
off or plugging/unplugging the USB cable to/
from the USB TO HOST terminal.
• While a USB device is connected to the
device, you should wait for six seconds or
more between these operations: (1) when
turning the power of the device off then on
again, or (2) when alternately connecting/dis-
connecting the USB cable.
Содержание CC121
Страница 1: ...EN ...