Steinberg CC121 Скачать руководство пользователя страница 2

 

PLEASE KEEP THIS MANUAL

 

This product utilizes batteries or an external power sup-
ply (adapter). DO NOT connect this product to any 
power supply or adapter other than one described in the 
manual, on the name plate, or specifically recom-
mended by Steinberg/Yamaha.

 

WARNING:

 

 Do not place this product in a position 

where anyone could walk on, trip over, or roll anything 
over power or connecting cords of any kind. The use of 
an extension cord is not recommended! If you must use 
an extension cord, the minimum wire size for a 25’ cord 
(or less) is 18 AWG. NOTE: The smaller the AWG num-
ber, the larger the current handling capacity. For longer 
extension cords, consult a local electrician.

This product should be used only with the components 
supplied or; a cart, rack, or stand that is recommended 
by Steinberg/Yamaha. If a cart, etc., is used, please 
observe all safety markings and instructions that 
accompany the accessory product.

 

SPECIFICATIONS SUBJECT TO CHANGE: 

 

The information contained in this manual is believed to 
be correct at the time of printing. However, Steinberg/
Yamaha reserves the right to change or modify any of 
the specifications without notice or obligation to update 
existing units.

This product, either alone or in combination with an 
amplifier and headphones or speaker/s, may be capable 
of producing sound levels that could cause permanent 
hearing loss. DO NOT operate for long periods of time 
at a high volume level or at a level that is uncomfortable. 
If you experience any hearing loss or ringing in the ears, 
you should consult an audiologist. 
IMPORTANT: The louder the sound, the shorter the 
time period before damage occurs.

Some Steinberg/Yamaha products may have benches
and / or accessory mounting fixtures that are either sup-
plied with the product or as optional accessories. Some 
of these items are designed to be dealer assembled or 
installed. Please make sure that benches are stable and 
any optional fixtures (where applicable) are well 
secured BEFORE using.
Benches supplied by Steinberg/Yamaha are designed 
for seating only. No other uses are recommended.

 

NOTICE: 

 

Service charges incurred due to a lack of knowledge 
relating to how a function or effect works (when the unit 
is operating as designed) are not covered by the manu-
facturer’s warranty, and are therefore the owners 
responsibility. Please study this manual carefully and 
consult your dealer before requesting service.

 

ENVIRONMENTAL ISSUES: 

 

Steinberg/Yamaha strives to produce products that are 
both user safe and environmentally friendly. We sin-
cerely believe that our products and the production 
methods used to produce them, meet these goals. In 
keeping with both the letter and the spirit of the law, we 
want you to be aware of the following:

 

Battery Notice: 

 

This product MAY contain a small non-rechargeable 
battery which (if applicable) is soldered in place. The 
average life span of this type of battery is approximately 
five years. When replacement becomes necessary, con-
tact a qualified service representative to perform the 
replacement.

This product may also use “household” type batteries. 
Some of these may be rechargeable. Make sure that the 
battery being charged is a rechargeable type and that 
the charger is intended for the battery being charged.

When installing batteries, do not mix batteries with new, 
or with batteries of a different type. Batteries MUST be 
installed correctly. Mismatches or incorrect installation 
may result in overheating and battery case rupture.

 

Warning: 

 

Do not attempt to disassemble, or incinerate any bat-
tery. Keep all batteries away from children. Dispose of 
used batteries promptly and as regulated by the laws in 
your area. Note: Check with any retailer of household 
type batteries in your area for battery disposal informa-
tion.

 

Disposal Notice: 

 

Should this product become damaged beyond repair, or 
for some reason its useful life is considered to be at an 
end, please observe all local, state, and federal regula-
tions that relate to the disposal of products that contain 
lead, batteries, plastics, etc. If your dealer is unable to 
assist you, please contact Steinberg/Yamaha directly.

 

NAME PLATE LOCATION: 

 

The name plate is located on the bottom of the product. 
The model number, serial number, power requirements, 
etc., are located on this plate. You should record the 
model number, serial number, and the date of purchase 
in the spaces provided below and retain this manual as 
a permanent record of your purchase.

 

Model

Serial No.

Purchase Date

 

SPECIAL MESSAGE SECTION

 

92-BP  

 

(bottom)

Содержание CC121





























Отзывы: