Software Installation
Operation Manual
11
ENGLISH
7
Insert the TOOLS for CC121 CD-ROM into
the CD-ROM drive.
Installation
The installer will install the following two software
components to your computer.
· USB-MIDI Driver
· Steinberg CC121 Extension
NOTE
· Use the Cancel button or Close button to quit the
installation. Quitting by using the [Ctrl]+[Alt]+[Delete]
buttons or by turning off the power while installation is
in process can result in problems since the installation
is terminated without performing a proper uninstall.
8
After the downloaded compressed file is
properly extracted, double-click the file
“setup.exe.”
The “Welcome to the InstallShield Wizard for
TOOLS for CC121” window appears.
9
Click [Next].
10
Follow the on-screen instructions in the
Setup window for USB-MIDI Driver and
Steinberg CC121 Extension appearing in
order.
NOTE
· If the same or new version of Steinberg CC121 Exten-
sion has already been installed in your computer, the
installation window of the corresponding software will
not appear.
· If a message
“
The software you are installing has not
passed Windows Logo Testing
”
appears, click [Con-
tinue Anyway]. You do not need to abort the installa-
tion. If the message does not appear, proceed to the
next step.
11
When installation is complete, a message
indicating so appears. If restarting of the
computer is necessary following successful
completion of the installation, make sure
that the radio button to the left of “Yes, I
want to restart my computer now” is
selected, then click [Finish] to restart the
computer. If restarting the computer is
unnecessary, click [Finish] to exit the instal-
lation process.
12
Press the [STANDBY/ON] switch of the
CC121 to set it to the ON position.
The “Found New Hardware Wizard” window
appears.
NOTE
· Some computers may take a while to display the Wiz-
ard window.
· A dialog box may appear asking you whether you
wish to connect to Windows Update. In this case,
select the radio button to the left of
“
Not at this time,
”
then click [Next].
13
Select the radio button next to “Install the
software automatically” then click [Next].
This operation starts the USB-MIDI driver’s
installation.
NOTE
· If a message “The software you are installing has not
passed Windows Logo Testing” appears, click [Con-
tinue Anyway]. You do not need to abort the installa-
tion. If the message does not appear, proceed to the
next step.
14
When a message indicating installation is
complete appears, click [Finish].
This completes installation of the necessary soft-
ware.
Uninstallation
To uninstall TOOLS for CC121, you must remove the
following two software components:
· USB-MIDI Driver
· Steinberg CC121 Extension
1
Disconnect all other USB devices except
mouse and keyboard from the computer.
2
Log on to the Administrator account.
Exit any open applications and close all open
windows.
3
From the Start menu, select ([Settings]
➝
)
[Control Panel]
➝
[Add or Remove Pro-
grams] to display the Add or Remove Pro-
grams panel.
4
Click “Change or Remove Programs”
located in the upper left, then select
“Yamaha USB-MIDI Driver”/ “Steinberg
CC121 Extension” from the list in the right
panel.
5
To uninstall the software, click [Change/
Remove]/ [Remove].
A dialog box appears. Follow the on-screen
instructions to remove the software.
Содержание CC121
Страница 1: ...EN ...