Steinberg CC121 Скачать руководство пользователя страница 10 | Manualshive

Страница: 10 / 28

Steinberg CC121 Скачать руководство пользователя страница 10

Software Installation

10

Operation Manual

Software Installation

To use the CC121 you must first install the software on the computer. This section explains the software installation.
Install Cubase AI before you install TOOLS for CC121.

NOTE

· If you have already installed a version of Cubase that is compatible with operation with the CC121 (page 15), the

instructions on installing Cubase AI described below are not necessary. Jump to the next section “Installing TOOLS for
CC121.”

Installing Cubase AI

NOTE

· You are only permitted to use this software pursuant to the terms and conditions of the “Steinberg Software End User

License Agreement (EULA)” shown during the installation.

· In order to have continuous use of Cubase AI, including support and other benefits, you will need to register the soft-

ware and activate your software license by starting it while the computer is connected to the Internet. Click the “Regis-
ter Now” button shown when the software is started, then fill in all required fields for registration. If you do not register
the software, you will be unable to use it after a limited period of time expires.

1

Start the computer and log on to the Admin-
istrator account.

2

Insert the Cubase AI DVD-ROM into the DVD-
ROM drive.

3

When the “WELCOME TO CUBASE AI” win-
dow appears, choose your preferred lan-
guage by clicking on the corresponding
national flag icon.

NOTE

· If this window does not appear automatically, open

the DVD-ROM then double-click the file “Start Center.”

4

Follow the onscreen instructions to install
the software.

Installing TOOLS for CC121

TOOLS for CC121 consists of two software components:USB-MIDI Driver and Steinberg CC121 Extension. In par-
ticular, you should install the USB-MIDI Driver to enable proper communication between the CC121 and your com-
puter. You should also install Steinberg CC121 Extension to ensure optimum control over Cubase. The TOOLS for
CC121 Installer installs these two software components.

NOTE

· You are only permitted to use this software pursuant to the terms and conditions of the “License Agreement” shown dur-

ing the installation.

■

Windows XP:

Preparing to install

1

Make sure that the [STANDBY/ON] switch of
the CC121 is in the STANDBY (

) position.

2

Disconnect all the devices other than the
mouse and keyboard from the computer,
then connect the CC121 directly to the com-
puter (without using a hub) by using a USB
cable.

3

Start the computer and log on to the Admin-
istrator account.

Exit any open applications and close all open
windows.

4

Select [Start] (

➝

[Settings])

➝

[Control

Panel], click “Switch to Classic View” in the
upper left of the window.

5

Go to [System]

➝

[Hardware]

➝

[Driver

Signing]

➝

[Driver Signing Options], and

select the radio button to the left of “Ignore -
Install the software anyway and don’t ask for
my approval” and click [OK].

NOTE

· After completing the installation, make sure to restore

the original settings if necessary.

6

Close the System Properties window and
Control Panel by clicking [OK] or the Close
button ([X]) of the windows.

«
...
8
9
10
11
12
...
»

Содержание CC121





























Отзывы:

Нет отзывов