Sound Parameters
The sound parameters in the upper right let you adjust the sound of the activated sound
sources.
Bark
The higher this setting, the more pronounced the transients. This adds more punch
and bite to the attack phase of the sound.
If this control is set all the way to the left, you hear the original sound.
Release
Controls the release level.
Pedal
Allows you to adjust the pedal noise that is produced when the sustain pedal is
pressed.
Extended Range
Extends the keyboard range that is used to trigger sounds.
●
If this option is activated, the keyboard range is from A-1 to C7.
●
If this option is deactivated, the keyboard range is from F0 to F6, as it is in the
original instrument.
Sound Sources
In the lower part of the Instrument page, you can activate and set up the four sound sources
that you can use.
You can use the clean, unprocessed signal or choose between three re-amped signals that were
recorded in parallel. The amplifiers were selected carefully to create a wide spectrum of sound
colors for all different kinds of music genres.
DI
Delivers the clean, unprocessed sound from the instrument.
On/Off
Activates/Deactivates the signal.
Amped Elektra
Instrument Page
5
Amped Elektra 1.0.0
