Steinbach Solardusche Split, Оригинальное руководство пользователя, Страница: 39 / 275

1. Unscrew the top part of the tank
1
from the bottom part of the tank
4
and remove the top part.
2. Unscrew the screws from the product
base.
3. Drain the remaining water from the
tank.
4. Screw the drain cap onto the tank.
The product is dismantled.
Storage
To store the product, proceed as follows:
1. Thoroughly clean the product (see section "Cleaning").
2. Let all parts dry completely.
3. Then store the product and accessories in a dry, frost-free place (≥ +40 °F/+5 °C).
The product is stored.
Troubleshooting
Fault description Cause Remedy
Water is still coming out of the
shower head even after the
faucet has been closed.
This is caused by the water
heating up in the
unpressurized tank.
It is not a defect!
Water is leaking from a screw
connection.
The screw connection is not
water-tight.
Wrap the thread in Teflon tape.
There is no water coming out
of the shower head.
No water is being supplied. Check the water supply.
Check the garden hose for
blockages and damage.
11
4
1
12
39