SM-BM-21S
SM-BM-21
Operator’s Manual
11
3.2. Adapting for 150
–300 mm pipes
To bevel pipes with diameters of 150
–300 mm (6–12″), assemble the standard guide
set in a different way. To do this, use the 6 mm hex wrench to remove two side
screws (
1
, Fig. 6) and remove the guide set (
2
). Remove the set by 180° around the
vertical axis (
3
), install again (
4
), and attach with the screws (
1
).
Fig. 6.
Rotating and installing the guide set
Use the 12 mm flat wrench to prevent the turn of the T-nut and use the 8 mm hex
wrench to remove the roller screw. Next, move the rollers from the hole (Fig. 7a) to
the slot. Install the rollers as shown in Fig. 7b and put the T-nut into the slot.
1
2
4
3
1
