18
OPERATION
(continued)
For best performance and to prevent overheating, empty the chip collector often.
EMPTYING THE CHIP COLLECTOR
WARNING!
ALWAYS DISCONNECT THE SAW FROM POWER SOURCE BEFORE CHANGING
BLADES, CLEARING CHIPS OR MAKING ADJUSTMENTS
.
1.
Loosen the two Chip Collector Cover Retaining screws (item# 22).
2.
Remove chip collector from the right side of saw. (item# 3)
3.
Empty chip collector by tipping the cover sideways and letting the chips and debris fall
out. Clean all debris from saw body.
4.
Install chip collector on saw and fasten securely by tightening thumbscrews.
WARNING!
FAILURE TO SECURE THE CHIP COLLECTOR COVER MAY RESULT IN UNCONTROLLED
DISCHARGE OF CHIPS AND OPERATOR INJURY. ALWAYS VERIFY PROPER INSTALLATION
OF COVER AND CHECK FREQUENTLY
