PB-5 / PBE-5 / PBC-5
PB-5 / PBE-5 / PBC-
5 Operator’s Manual
13
3.4. Clamping the machine into the pipe
Put the machine into the pipe (
1
, Fig. 5) to set the tool bits at least 3 mm (0.12
″) from
the pipe end. Then, use the 13 mm socket wrench to rotate the draw nut (
2
) to the
right to expand the jaw blocks and clamp the machine into the pipe. Make sure that
the jaw blocks are put further than the surface after machining (
3
).
Fig. 5.
Clamping the machine into the pipe
2
1
3
3
